Three CMOS drain - open output 12v remote rgb led lighting strip
control 216W For instance, point source of light 1.12v remote rgb led strip control 216W
2.3*6A,216W
3.NW:138g GW:180g
4.L137*W97*H46
5.13kinds of modes,64steps of speedsMODEL NO: RF4BH-TR
Summarization
RF controller, which adopts the advanced micro control unit, is
used for controlling a variety of lamps whose source of light is
LED. For instance, point source of light, flexible light strip,
wall washer lamp, glass curtain wall light and so on. At the same
time, it has many advantages such as convenient connection,
simplicity to use and others. The RF controlling system is to make
your home decoration possible with industrial products.
Technical parameters
1) Working temperature: -20-60 °C
2) Supply voltage: DC12V
3) Output:Three CMOS drain-open output
4) Connecting mode:common anode(default)
5) Transmission/Receiving frequency: 433 MHz
6) External dimension: L105mm*W64mm*H24 mm
7) Packing dimension: L137mm*W97mm*H46 mm
8) Net weight: 138g
9) Gross weight: 180g
10) Max output current: 3*6A
11) Max output power: 216W
Direction for use
1. Connect the load wires at first, following by the power wires.
Please ensure that short circuit can not occur between connecting
wires before you turn on the power.
2. Adopt RF control method, function of each button as below:
A. Button A("Program"): pattern key; one pattern will appear if you
press one time
B. Button B("Speed up"): to speed up color changing
C. Button C("Speed down"): to speed down color changing
D. Button D("On/off"): power switch; you could turn on/off the
controller in any states
3. Standard color changes as follows:
Item | Patterns | remarks |
1 | Static red |
|
2 | Static Green |
|
3 | Static Blue |
|
4 | Static Yellow |
|
5 | Static Purple |
|
6 | Static Cyan |
|
7 | Static White |
|
8 | Three-color jumpy change | Button B and C are available |
9 | Seven-color jumpy change | Button B and C are available |
10 | Three-color gradual change | Button B and C are available |
11 | Seven-color gradual change | Button B and C are available |
12 | Seven-color jumpy change then gradual change | Button B and C are available |
Attentions:
1. Supply voltage of this product is DC12V; never connect to
AC220V;
2. Never connect two wires directly in case of short circuit;
3. Load wires should be connected correctly according to the
connecting diagram offers;
4. Don't peel off the label on the controller in case any
indication of information will be missed;
5. Warranty of this product is one year. In this period, we
guarantee replacement or repairing with no charge, but exclude the
artificial situation of damaged or overload working.
